Wegener UNITY4000 Especificações descarregar pdf (Página 15)

Rear Panel Description

Connections

The AMB-OS AMR-100 Receiver has several connections to facilitate program playback

and transfers. The connectors are:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

1. Power – A standard computer type power cable is used

2. RF – F-type Connector: L-Band input from the satellite antenna

3. RS-232 – 9-pin sub-d female (DTE) connector for serial communication (a modem cable

is needed to connect to a computer)

4. Ethernet – Standard RJ-45 Ethernet network cable connection

5. Reset Switch

Reboots the receiver without performing a power recycle.

Audio outputs:

There are two sets of digital outputs that correspond to the two stereo analog outputs.

They are listed in the same order as you see them on the back of the receiver from

left to right.

Digital – Port 1

6. AES-EBU – XLR type connector

7. SPDIF – BNC connector

8. Optical – standard optical cable

Digital – Port 2

9. AES-EBU – XLR type connector

10. SPDIF – BNC connector

11. Optical – standard optical cable

Analog – Port 1

12. XLR connector – Left channel

13. XLR connector – Right channel

Analog – Port 2

14. XLR connector – Left channel

15. XLR connector – Right channel

16. Relays – 25-pin sub-d connector (the connector pinout is described in the RELAY

SPECIFICATIONS section)

Rev. 36 – Firmware version 1.61 15

2008

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 58 59

Sem comentários

Wegener UNITY4000 Especificações Página 15